S2K Commerce - Products Dropdown - SBS
Actions
S2K Commerce - Order Entry
Actions
Simpson Strong-Tie Fence Clip Bracket
The FB is designed for connecting fence rails to posts. The
simple design of this fence rail bracket provides strong connections without
the need for toe nails or screws. The versatility of the FB makes planning and
building fences, deck/porch railings and louvers fast and easy.
Key Features
- Preinstallation
of brackets allows rails to slide into place easily
- Eliminates
need for toe nails or screws
Simpson Strong-Tie Fence Rail Bracket
The FBFZ is designed to provide a sturdy, concealed
connection between rails and posts. The design of this flat fence rail bracket
provides strong, simple connections without the need for toe nails or screws.
The flat-plate design of the FBFZ both eases installation and provides a clean
appearance.
Key Features
- Clean,
versatile connections make planning and building fences, deck/porch
railings and louvers fast and easy
- Can
be used for handrail attachments for porch and deck railings that are
30" or closer to ground level
- Bendable
tabs on each end of the bracket allow for slight adjustments when wood
rails are cut too short and provide a secure connection when wood expands
and contracts
- Flexible
hole design can accommodate multiple fastener types, including nails and
Strong-Drive® SD Connector screws
The BC post base is designed to connect a post to a wood supporting member.
The 18-gauge material of this post base makes it ideal for light-duty connections.
The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
The BC post base is designed to connect a post to a wood supporting member.
The 18-gauge material of this post base makes it ideal for light-duty connections.
The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
The BCS is designed to connect a multi-ply member beam to a post.
The dimensions of this post cap accommodate the narrower width of multiple 2x members on top of the post.
The BCS provides both lateral and uplift support and features double-shear nailing that distributes the load through two points for optimal strength.
The CC is designed to provide strong column-beam connections in wood construction.
The seat of the column cap provides an additional surface area of bearing that extends beyond each side of the column.
The CC helps to distribute the load from the beam and provide support for the connection.
The CPTZ concealed post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is part of a system of concealed connectors that includes the CBTZ and CJT.
The CPTZ is tested and load rated for uplift, download and lateral load.
Simpson Strong-Tie saves installers time by providing all the necessary components to make the post connection in one box (anchors not included).
There are two anchorage solutions available.
The CPTZ concealed post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is part of a system of concealed connectors that includes the CBTZ and CJT.
The CPTZ is tested and load rated for uplift, download and lateral load.
Simpson Strong-Tie saves installers time by providing all the necessary components to make the post connection in one box (anchors not included).
There are two anchorage solutions available.
Simpson Strong Tie HHUS210 Joist Hanger
The HHUS is designed for applications where higher loads are needed.
This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.
This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
Simpson Strong Tie HU212 Face Mount Hanger
The SIMPSON HU212-3 is a face mount hanger used for supporting joists, beams or trusses. It is made of 14-gauge steel and has a ZMAX galvanized finish for added corrosion resistance. The hanger measures 4-1/2" x 10" and has a 2" x 12" joist nailing surface. The hanger also features speed prongs, which allow for quick and easy installation.
The SIMPSON HU212-3 is designed to provide a strong and secure connection between the joist and the header or beam, helping to prevent structural failure and ensuring the safety of the structure.
The SIMPSON HU28 is a face mount hanger designed for connecting 2x8 joists or beams to wood structures such as headers, ledgers, or other wood members. The hanger is made from 18-gauge steel and has a G90 galvanized coating for added corrosion resistance.
It features speed prongs which allow for quick and easy installation, as well as double-shear nailing which provides a secure and strong connection. The hanger also has a skewed 45-degree joist nail pattern which allows nails to be installed at opposing angles for greater strength.
Simpson Strong Tie HU412 Face Mount Hanger
The Simpson HU412-2 is a face mount hanger designed for 4x12 lumber. It measures 7 inches by 11-1/4 inches and is made of 14-gauge steel with a galvanized finish.
The hanger has double-shear nailing that distributes the load through two points on each joist nail for added strength. It also features a speed prong that provides temporary attachment for easy installation, and a seat that helps to locate and stabilize the joist. The Simpson HU412-2 is suitable for a wide range of applications including decks, patios, and other outdoor structures.