|◀ 85 - 96 of 150 ▶|
View:

The SIMPSON HD3B is a heavy-duty bolted holdown designed to provide lateral and uplift resistance for wood structures. It measures 8 inches in height and has a 5/8 inch bolt diameter.

The holdown features a double-shear nailing pattern for added strength and a pre-punched hole for easier installation. It can be used in both new and retrofit applications and is suitable for use in seismic and high-wind areas. The SIMPSON HD3B is made from galvanized steel for corrosion resistance and durability.


Item#:
HD3B
Your Price:
17.18
EACH

The HDB is designed to provide loads for intermediate-load-range shearwalls, braced-wall panels and lateral applications in wood construction.

This bolted holdown is installed with bolts into studs or columns and offers low-deflection performance for a range of load requirements.

The HDB is suitable for back-to-back applications where eccentricity is a concern.

Item#:
HD7B
Your Price:
43.22
EACH

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support.

This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

Value-engineered, the HGUS is designed to carry high loads for an economical price.

Item#:
HGUS28-3
Your Price:
27.78
EACH

The HHDQ is designed for extra-high loads and provides ease of installation.

This heavy holdown comes with Strong-Drive SDS Heavy-Duty Connector screws, which install easily, reduce fastener slip and provide a greater net section than bolts.

The HHDQ is installed directly on the sill plate and is suitable for back-to-back applications where eccentricity is a concern.

Item#:
HHDQ11-SDS2.5
Your Price:
0.00
EACH
Contact us to order

The HSUR/L are 45 degees-skewed hangers designed to support large joist members or double I-joists in wood construction.

These heavy U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation.

The HSUR and HSUL hangers are identical except that they are skewed 45 degrees to the right (HSUR) and the left (HSUL), respectively.

Item#:
HSUR410
Your Price:
36.02
EACH

The SIMPSON HU210-2 is a face mount hanger designed for connecting 2x10 joists to wood structures. It is made of 18-gauge galvanized steel, providing strength and durability.

The hanger has a speed prong that allows for quick and easy installation, and a double-shear nailing pattern which helps to reduce the chance of splitting the wood. The hanger has pre-punched holes for accurate nail placement and a skewed 45-degree design that provides a better fit for the joist. The SIMPSON HU210-2 is a versatile and reliable hanger suitable for a variety of construction projects

Item#:
HU210-2
Your Price:
18.23
EACH

The Simpson HU212 is a 2" x 12" face mount hanger designed for use in connecting a wood beam or joist to a wood ledger or another wood beam. It features a "double-shear" nailing design that distributes the load through two points on each side of the joist, providing a stronger and more secure connection. The hanger is made of 18-gauge steel with a galvanized finish for corrosion resistance and durability. It has pre-punched holes for easy installation with nails or structural screws.

The HU212 can be used for both interior and exterior applications and is suitable for use in residential or commercial construction projects.


Item#:
HU212
Your Price:
20.93
EACH

The SIMPSON HU7 is a face mount hanger designed to provide structural support for wood beams and joists. It measures 1-3/4 inches by 7-1/4 inches and is made from galvanized steel for increased durability and resistance to corrosion.

The hanger is designed to be installed using nails or structural screws, and it features speed prongs that allow for easy installation and a secure connection. The HU7 is designed to be used with solid sawn lumber, I-joists, and trusses, and it is commonly used in a variety of residential and commercial construction applications.


Item#:
HU7
Your Price:
17.68
EACH

The SIMPSON HUC210-4Z is a 2" X 10" concealed flange hanger designed to provide structural support to wood members while remaining hidden from view. It is made from galvanized steel for added strength and durability, and features a unique concealed design that allows it to be fastened directly to the joist using Simpson Strong-Tie SD screws.

The hanger has a ZMAX coating that provides additional corrosion resistance, making it ideal for use in coastal or high-moisture environments. The HUC210-4Z hanger can be used for a variety of applications, including decks, porches, and other outdoor projects where a clean, concealed appearance is desired.


Item#:
HUC210-4Z
Your Price:
53.08
EACH

The SIMPSON HUC26-3 is a concealed flange hanger designed for connecting joists to wood members in applications where higher load values are required. It has a unique design that enables it to be installed with Simpson Strong-Tie structural screws or standard nails, providing flexibility in installation options.

The HUC26-3 is made of 14-gauge steel and has a galvanized finish for added protection against corrosion. It measures 2 inches by 6 inches, making it suitable for use with nominal lumber sizes. The concealed flange design provides a cleaner look and eliminates the need for additional joist hangers or framing angles, reducing installation time and costs.



Item#:
HUC26-3
Your Price:
34.58
EACH
The Simpson HUC28-2Z is a 2" x 8" concealed flange hanger that is designed for connecting wood members to wood structures. This hanger features a concealed flange design that hides the hanger from view, providing a clean and professional finish.

It has a high load capacity and can be installed quickly and easily with common nails or structural screws. The hanger's unique design also helps to prevent splitting of the wood, providing added strength and durability to the connection.

Item#:
HUC28-2Z
Your Price:
31.15
EACH

The Simpson HUC28-4 is a 2-inch by 8-inch concealed flange hanger designed to provide a strong and secure connection between wood members. It features a unique concealed design that hides the connection for a cleaner appearance while providing additional protection against corrosion.

The hanger is made from 14-gauge steel with a galvanized coating for added durability and resistance to rust and corrosion. It also has pre-punched holes for easy installation using Simpson Strong-Tie Structural Screws or Strong-Drive SDS screws.

The HUC28-4 is suitable for use in a wide range of applications, including decks, patios, and other outdoor structures.


Item#:
HUC28-4
Your Price:
46.06
EACH
|◀ 85 - 96 of 150 ▶|
View: