The Simpson HU212 is a 2" x 12" face mount hanger designed for use in connecting a wood beam or joist to a wood ledger or another wood beam. It features a "double-shear" nailing design that distributes the load through two points on each side of the joist, providing a stronger and more secure connection. The hanger is made of 18-gauge steel with a galvanized finish for corrosion resistance and durability. It has pre-punched holes for easy installation with nails or structural screws.

The HU212 can be used for both interior and exterior applications and is suitable for use in residential or commercial construction projects.

The SIMPSON HU212-3 is a face mount hanger used for supporting joists, beams or trusses. It is made of 14-gauge steel and has a ZMAX galvanized finish for added corrosion resistance. The hanger measures 4-1/2" x 10" and has a 2" x 12" joist nailing surface. The hanger also features speed prongs, which allow for quick and easy installation.

The SIMPSON HU212-3 is designed to provide a strong and secure connection between the joist and the header or beam, helping to prevent structural failure and ensuring the safety of the structure.

The SIMPSON HU28 is a face mount hanger designed for connecting 2x8 joists or beams to wood structures such as headers, ledgers, or other wood members. The hanger is made from 18-gauge steel and has a G90 galvanized coating for added corrosion resistance.

It features speed prongs which allow for quick and easy installation, as well as double-shear nailing which provides a secure and strong connection. The hanger also has a skewed 45-degree joist nail pattern which allows nails to be installed at opposing angles for greater strength.

The Simpson HU412-2 is a face mount hanger designed for 4x12 lumber. It measures 7 inches by 11-1/4 inches and is made of 14-gauge steel with a galvanized finish.

The hanger has double-shear nailing that distributes the load through two points on each joist nail for added strength. It also features a speed prong that provides temporary attachment for easy installation, and a seat that helps to locate and stabilize the joist. The Simpson HU412-2 is suitable for a wide range of applications including decks, patios, and other outdoor structures.

The SIMPSON HU414-2 is a face mount hanger designed for use in wood construction. It is made of galvanized steel for strength and durability and has a 4-inch by 14-inch size. This hanger is used to provide a strong, secure connection between a wood beam or joist and another wood member, such as a post or header.

The HU414-2 features a double-shear nailing design that distributes the load over more nails, resulting in a stronger connection. It also has a sloped seat to reduce the possibility of the wood member splitting.The hanger has pre-punched holes for nails or screws, and installation is quick and easy with the use of standard hardware.

The SIMPSON HU7 is a face mount hanger designed to provide structural support for wood beams and joists. It measures 1-3/4 inches by 7-1/4 inches and is made from galvanized steel for increased durability and resistance to corrosion.

The hanger is designed to be installed using nails or structural screws, and it features speed prongs that allow for easy installation and a secure connection. The HU7 is designed to be used with solid sawn lumber, I-joists, and trusses, and it is commonly used in a variety of residential and commercial construction applications.

The SIMPSON HUC210-4Z is a 2" X 10" concealed flange hanger designed to provide structural support to wood members while remaining hidden from view. It is made from galvanized steel for added strength and durability, and features a unique concealed design that allows it to be fastened directly to the joist using Simpson Strong-Tie SD screws.

The hanger has a ZMAX coating that provides additional corrosion resistance, making it ideal for use in coastal or high-moisture environments. The HUC210-4Z hanger can be used for a variety of applications, including decks, porches, and other outdoor projects where a clean, concealed appearance is desired.

The SIMPSON HUC26-3 is a concealed flange hanger designed for connecting joists to wood members in applications where higher load values are required. It has a unique design that enables it to be installed with Simpson Strong-Tie structural screws or standard nails, providing flexibility in installation options.

The HUC26-3 is made of 14-gauge steel and has a galvanized finish for added protection against corrosion. It measures 2 inches by 6 inches, making it suitable for use with nominal lumber sizes. The concealed flange design provides a cleaner look and eliminates the need for additional joist hangers or framing angles, reducing installation time and costs.

The SIMPSON HUS1.81/10 is a face mount hanger designed to connect a 1-3/4" x 9-1/2" wood member to a wood structure. It features speed prongs, which allow for quick and easy installation, and a double-shear nailing design that distributes the load to two points for increased strength.

The hanger also has a skewed 45 degree angle, allowing for a more secure connection to the header. The HUS series of hangers are generally used in residential construction, but may be suitable for certain light commercial applications as well.

The HUS is designed for applications where higher loads are needed.

This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.

Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options.

The JB series is a cost-effective hanger featuring min/max joist nailing options.