The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson THA218 is a type of joist hanger designed to support a 2x18 inch joist. It is made of galvanized steel, which provides corrosion resistance and durability. The hanger has a sloped seat that provides a stable and secure connection between the joist and the supporting structure.

The THA218 also features speed prongs that allow for quick and easy installation, as well as a double-shear nailing design that provides increased strength and stability. The hanger is designed to be used with either nails or strong-drive screws and is suitable for a wide range of applications, including decks, patios, and other outdoor structures.

The Simpson 1" x 12" Wedge Anchor is a type of fastener used for anchoring into concrete, brick, or block. It features a threaded end that allows for a nut and washer to be fastened onto it after installation, creating a secure hold. This particular wedge anchor is mechanically galvanized, which means it has been coated with a layer of zinc for corrosion resistance.

The length of the anchor is 12 inches, and the diameter is 1 inch. The wedge anchor is designed to expand as it is tightened, creating a strong grip in the base material. It is commonly used for attaching structural elements such as beams, posts, and handrails to concrete surfaces.

The Simpson 3/8" x 2-3/4" Wedge Anchor is a mechanical anchor designed to be used in solid concrete. It features a threaded stud with a wedge-shaped expansion clip that is inserted into a pre-drilled hole in the concrete. As the nut is tightened on the threaded end, the clip is drawn up into the expansion sleeve, causing it to expand and wedge tightly against the sides of the hole, providing a secure anchoring point for a variety of structural elements.

 The anchor is made from carbon steel and is zinc-plated for corrosion resistance. It is commonly used in a variety of applications, including the installation of steel columns, machinery, and equipment.

The Simpson 3/8" x 3" Wedge Anchor is a mechanical anchor designed to secure objects to concrete or masonry. It features a threaded stud with a cone-shaped end and a clip that expands when the nut is tightened, creating a secure hold in the concrete.

The anchor is made of carbon steel and has a zinc-plated finish for corrosion resistance. It is commonly used in construction and industrial applications to anchor structural steel, equipment, and other heavy-duty items to concrete surfaces.

The Simpson 3/8" x 3-3/4" Wedge Anchor is a mechanical anchor designed for use in concrete, solid brick, and solid block materials. It features a wedge-shaped expansion clip that creates a strong hold in the base material when tightened with a nut and washer. The anchor has a threaded stud that protrudes from the surface once installed, allowing for attachment of a wide range of fixtures and equipment.

This anchor is made of carbon steel with a zinc plating to provide corrosion resistance. It is commonly used in construction applications for securing structural steel, handrails, and other heavy-duty equipment to concrete or masonry surfaces.

The Simpson 1/2" x 2-3/4" Wedge Anchor is a mechanical anchor designed for use in solid concrete. It features a one-piece clip that provides uniform holding capacity and is ideal for use in applications where the depth of embedment is critical. The anchor is made from carbon steel that is zinc-plated for corrosion resistance, and it comes pre-assembled with a nut and washer for easy installation. When the nut is tightened, the wedge anchor expands against the concrete, creating a secure connection for structural applications such as attaching handrails, shelving units, or machinery.

The Simpson 1/2" x 4-1/4" wedge anchor is a type of mechanical expansion anchor used to fasten heavy loads to concrete, masonry, and other solid base materials. The anchor consists of a steel body with a threaded end, a nut, and a washer.

 The threaded end is inserted into a pre-drilled hole and then tightened with a wrench, causing the anchor to expand and wedge tightly against the sides of the hole. The nut and washer are then used to attach the load to the anchor. This type of anchor is commonly used in construction for securing steel columns, heavy machinery, and other large structures to concrete floors or walls.

Simpson 1/2" x 5-1/2" Wedge Anchor is a heavy-duty mechanical anchor designed for use in solid concrete. It is made of zinc-plated carbon steel and features a unique design that provides superior strength and reliability. The anchor has a pre-expanded cone-shaped end that is driven into the concrete by hammering the top of the anchor. As the cone is hammered, it forces the sides of the anchor to expand, creating a tight grip on the concrete.

The anchor is then secured by tightening the nut on the top of the anchor, which pulls the cone into the expansion clip, creating a secure hold. This wedge anchor is commonly used for applications such as installing heavy machinery, equipment, and structural steel to concrete.