The Simpson 5/8" x 4-1/2" wedge anchor is a mechanical anchor used for attaching objects to concrete, masonry, or other hard materials. It consists of a threaded stud that is inserted into a pre-drilled hole and expanded using a wedge-shaped clip to create a secure connection.

The anchor is made from carbon steel that is zinc-plated for corrosion resistance. It is commonly used in construction, industrial, and commercial applications to fasten equipment, machinery, structural supports, and other heavy loads to concrete surfaces.

The Simpson 3/4" x 10" Wedge Anchor is a mechanical type of anchor that is designed to provide a secure hold in concrete, masonry, and other types of solid base materials. The anchor features a tapered and threaded design that enables it to be easily inserted into a pre-drilled hole, and then expands to create a strong and durable connection.

The mechanical galvanized finish provides an additional layer of protection against corrosion and rust, making it suitable for use in outdoor or damp environments. The anchor is ideal for use in a range of applications, including structural steel, heavy equipment, and machinery.

The Simpson 3/4" x 8-1/2" Wedge Anchor is a mechanical anchor designed for use in concrete. It features a one-piece, tamper-proof design that ensures a secure and permanent installation. The anchor is made of carbon steel and is mechanically galvanized to provide corrosion resistance.

It has a finished hex head for easy installation and is ideal for use in applications that require a high-strength anchor such as heavy machinery, equipment, and structural supports.

The Strong-Drive SDCP Timber-CP screw is a structural fastener available in a variety of lengths and is designed for cross-laminated timber (CLT) and mass timber construction, as well as general interior applications.

These partially threaded, 0.315"- and 0.390"-diameter structural fasteners are designed to pull structural members together with superb holding power and excellent load capacity.

The large, flat head and underhead nibs provide for clean countersinking, flush with the surface.

Predrilling is not typically required.

For interior and dry applications only.

The Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screw is a 1/4"-diameter high-strength structural screw ideal for various connector installations as well as wood-to-wood and engineered wood applications.

It installs with no predrilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating.

The SDS Strong-Drive 1/4" wood screw line has expanded to include stainless-steel SDS screws in 1 1/2" to 3 1/2" lengths, suitable for fastening Simpson Strong-Tie stainless-steel products.

Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel.

The stainless-steel SDS screws are appropriate for higher-exposure environments where maximum corrosion-resistance is required

The Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screw is a 1/4"-diameter high-strength structural screw ideal for various connector installations as well as wood-to-wood and engineered wood applications.

It installs with no predrilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating.

The SDS Strong-Drive 1/4" wood screw line has expanded to include stainless-steel SDS screws in 1 1/2" to 3 1/2" lengths, suitable for fastening Simpson Strong-Tie stainless-steel products.

Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel.

The stainless-steel SDS screws are appropriate for higher-exposure environments where maximum corrosion-resistance is required

Structural Wood Screws are designed with a shorter thread length to fasten multi-ply members such as trusses, engineered lumber products and solid-sawn lumber.

Large washer head provides maximum bearing area and deep 6-lobe recess reduces cam-out.

Requires type T-40 bit.

Optimal screw lengths provide maximum penetration while preventing the point from protruding out the back member.

Structural Wood Screws are designed with a shorter thread length to fasten multi-ply members such as trusses, engineered lumber products and solid-sawn lumber.

Large washer head provides maximum bearing area and deep 6-lobe recess reduces cam-out.

Requires type T-40 bit.

Optimal screw lengths provide maximum penetration while preventing the point from protruding out the back member.

Truss head screws are threaded fasteners with a mushroom-shaped head.

This framing angle is designed for making a variety of connections.

The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening.

Provides easy and fast installation.

This is a balanced and completely reversible framing angle designed for making a variety of connections.

The angle’s exclusive bend slot allows instant and accurate field bends for all two- and three-way ties.

This angel is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.

The ABA is designed to attach wooden posts to existing concrete.

The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post.

The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive SD Connector screws.

This versatile post base makes a cost-effective option for securing a post to the foundation.