The SIMPSON HUS1.81/10 is a face mount hanger designed to connect a 1-3/4" x 9-1/2" wood member to a wood structure. It features speed prongs, which allow for quick and easy installation, and a double-shear nailing design that distributes the load to two points for increased strength.

The hanger also has a skewed 45 degree angle, allowing for a more secure connection to the header. The HUS series of hangers are generally used in residential construction, but may be suitable for certain light commercial applications as well.

The Simpson HUS210-2 is a face mount hanger designed for use in heavy-duty applications requiring high load capacity. The hanger is made from 14-gauge steel and features a double shear nailing pattern that distributes the load across two points for added strength. The hanger has a 2" x 10" size that fits standard dimensional lumber and is installed using Simpson Strong-Tie structural screws or nails.

The HUS210-2 hanger is galvanized for added protection against corrosion and is suitable for use in interior and exterior applications. It is commonly used for deck and patio covers, pergolas, and other outdoor structures that require a strong, reliable connection between the beam and the post.

The HUS is designed for applications where higher loads are needed.

This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

The Simpson JB212A is a type of joist hanger that is used to connect 2-inch by 12-inch (nominal size) lumber to wood structures. The hanger is made of galvanized steel to resist corrosion and has a right skew orientation. It has a speed prong that allows for quick installation and a double shear nailing feature that distributes the load through two points on each side of the joist.

The JB212A is also designed with a seat that provides maximum contact between the joist and hanger, increasing the load capacity of the connection. This hanger is commonly used in decks, balconies, and other outdoor applications where a strong and durable connection is required.

The Simpson LF2511 is a heavy-duty joist hanger designed to support 2-1/2" x 11-1/4" joists. It has a unique design that provides added strength and reduces the chance of splitting. The hanger is made of galvanized steel, which offers excellent corrosion resistance and durability.

It features speed prongs, which make installation fast and easy, and a sloped seat that allows for quick and accurate positioning of the joist. The LF2511 is ideal for use in applications where high load-carrying capacities are required, such as decks, porches, and other outdoor structures.

The SIMPSON LF3511 is a joist hanger designed to provide support for dimensional lumber joists. It measures 3-1/2" x 11-1/4" x 11-7/8" and features a skewed 45 degree angle to accommodate skewed, sloped or skewed/sloped applications. The hanger is made from 18-gauge steel and has a galvanized finish for added durability and corrosion resistance.

 It has a speed prong feature which allows for quick and easy installation with nails or screws. The LF3511 is suitable for use in a variety of construction applications, including decks, porches, and other outdoor structures.

The innovative LSSJ is ideal for connecting jack rafters to hip members.

Featuring a one-sided connection point for ease of installation and a versatile, hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12.

The LSSJ’s header flange allows for easy skew adjustment, from 0 degrees  to 45 degrees 

It ships pre-bent at 45 degrees so is ready to place for most typical applications. Specify left (L) or right (R) model when ordering.

The innovative LSSJ is ideal for connecting jack rafters to hip members.

Featuring a one-sided connection point for ease of installation and a versatile, hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12.

The LSSJ’s header flange allows for easy skew adjustment, from 0 degrees  to 45 degrees 

It ships pre-bent at 45 degrees so is ready to place for most typical applications. Specify left (L) or right (R) model when ordering.

The SIMPSON LUC210Z 2" x 10" Joist Hanger is a metal bracket designed to provide a strong and durable connection between a 2x10 joist and a header or beam. The hanger is made of galvanized steel, which provides added durability and resistance to corrosion.

The LUC210Z hanger features a double-shear nailing design, which allows for secure attachment to the header or beam with nails or structural screws. It also features a speed prong that allows for easier installation and ensures proper alignment of the hanger during installation.

With dimensions of 2" x 10", the LUC210Z hanger is suitable for use with larger dimensional lumber. The hanger's design allows for a flush installation, reducing the need for additional carpentry work.

Using a joist hanger like the SIMPSON LUC210Z provides a strong and reliable connection between the joist and the header or beam. This helps to prevent structural failures and ensures the safety and stability of the building or structure. Additionally, using a hanger can help to speed up the installation process, reducing labor costs and allowing for quicker completion of the project. The LUC210Z hanger is ideal for use in a variety of construction and building projects, such as decks, porches, and other outdoor structures.

The Simpson LUC26Z is a 2" x 6" concealed flange hanger designed for use with solid sawn lumber, engineered wood products, and structural composite lumber. It is used to support wood joists or beams and attach them to wood members, masonry, or concrete. The hanger is made of galvanized steel for corrosion resistance and features a concealed flange design that allows for easy installation and a cleaner appearance. It has pre-punched nail holes and stronger skewed nails to resist high wind loads and seismic forces.

The LUC26Z hanger is also designed with a slopeable seat that adjusts to match the slope of the supporting member for better installation flexibility.

The SIMPSON LUS210-2SS 2" x 10" Face Mount Hanger is a metal bracket designed to provide a strong and durable connection between a 2x10 joist and a header or beam. The hanger is made of stainless steel, which provides superior durability and resistance to corrosion in harsh environments.

The LUS210-2SS hanger features a double-shear nailing design, which allows for secure attachment to the header or beam with nails or structural screws. It also features a speed prong that allows for easier installation and ensures proper alignment of the hanger during installation.

The face mount design of the LUS210-2SS hanger allows for easy installation and maximum joist support. The hanger's design allows for a flush installation, reducing the need for additional carpentry work.

The LUS210SS hanger features a double-shear nailing design, which allows for secure attachment to the header or beam with nails or structural screws. It also features a speed prong that allows for easier installation and ensures proper alignment of the hanger during installation.

With dimensions of 2" x 10", the LUS210SS hanger is suitable for use with larger dimensional lumber. The hanger's design allows for a flush installation, reducing the need for additional carpentry work.

Using a face mount hanger like the SIMPSON LUS210SS provides a strong and reliable connection between the joist and the header or beam. This helps to prevent structural failures and ensures the safety and stability of the building or structure. Additionally, using a hanger can help to speed up the installation process, reducing labor costs and allowing for quicker completion of the project. The LUS210SS hanger is ideal for use in a variety of construction and building projects, such as decks, porches, and other outdoor structures, where superior corrosion resistance is needed.