The SIMPSON HU7 is a face mount hanger designed to provide structural support for wood beams and joists. It measures 1-3/4 inches by 7-1/4 inches and is made from galvanized steel for increased durability and resistance to corrosion.

The hanger is designed to be installed using nails or structural screws, and it features speed prongs that allow for easy installation and a secure connection. The HU7 is designed to be used with solid sawn lumber, I-joists, and trusses, and it is commonly used in a variety of residential and commercial construction applications.

The SIMPSON HUC210-4Z is a 2" X 10" concealed flange hanger designed to provide structural support to wood members while remaining hidden from view. It is made from galvanized steel for added strength and durability, and features a unique concealed design that allows it to be fastened directly to the joist using Simpson Strong-Tie SD screws.

The hanger has a ZMAX coating that provides additional corrosion resistance, making it ideal for use in coastal or high-moisture environments. The HUC210-4Z hanger can be used for a variety of applications, including decks, porches, and other outdoor projects where a clean, concealed appearance is desired.

The SIMPSON HUC26-3 is a concealed flange hanger designed for connecting joists to wood members in applications where higher load values are required. It has a unique design that enables it to be installed with Simpson Strong-Tie structural screws or standard nails, providing flexibility in installation options.

The HUC26-3 is made of 14-gauge steel and has a galvanized finish for added protection against corrosion. It measures 2 inches by 6 inches, making it suitable for use with nominal lumber sizes. The concealed flange design provides a cleaner look and eliminates the need for additional joist hangers or framing angles, reducing installation time and costs.

The Simpson HUC28-4 is a 2-inch by 8-inch concealed flange hanger designed to provide a strong and secure connection between wood members. It features a unique concealed design that hides the connection for a cleaner appearance while providing additional protection against corrosion.

The hanger is made from 14-gauge steel with a galvanized coating for added durability and resistance to rust and corrosion. It also has pre-punched holes for easy installation using Simpson Strong-Tie Structural Screws or Strong-Drive SDS screws.

The HUC28-4 is suitable for use in a wide range of applications, including decks, patios, and other outdoor structures.

The SIMPSON HUS1.81/10 is a face mount hanger designed to connect a 1-3/4" x 9-1/2" wood member to a wood structure. It features speed prongs, which allow for quick and easy installation, and a double-shear nailing design that distributes the load to two points for increased strength.

The hanger also has a skewed 45 degree angle, allowing for a more secure connection to the header. The HUS series of hangers are generally used in residential construction, but may be suitable for certain light commercial applications as well.

The Simpson HUS210-2 is a face mount hanger designed for use in heavy-duty applications requiring high load capacity. The hanger is made from 14-gauge steel and features a double shear nailing pattern that distributes the load across two points for added strength. The hanger has a 2" x 10" size that fits standard dimensional lumber and is installed using Simpson Strong-Tie structural screws or nails.

The HUS210-2 hanger is galvanized for added protection against corrosion and is suitable for use in interior and exterior applications. It is commonly used for deck and patio covers, pergolas, and other outdoor structures that require a strong, reliable connection between the beam and the post.

The HUS is designed for applications where higher loads are needed.

This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.

Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options.

The JB series is a cost-effective hanger featuring min/max joist nailing options.

The Simpson JB212A is a type of joist hanger that is used to connect 2-inch by 12-inch (nominal size) lumber to wood structures. The hanger is made of galvanized steel to resist corrosion and has a right skew orientation. It has a speed prong that allows for quick installation and a double shear nailing feature that distributes the load through two points on each side of the joist.

The JB212A is also designed with a seat that provides maximum contact between the joist and hanger, increasing the load capacity of the connection. This hanger is commonly used in decks, balconies, and other outdoor applications where a strong and durable connection is required.

The SIMPSON JB26 7" x 11-1/4" Flange Joist Hanger is a metal connector designed to support and connect a wood beam or joist to a wood structure such as a wall or header. The hanger is made of galvanized steel for added durability and resistance to corrosion.

The flange of the hanger is designed to be fastened to the supporting structure with nails, screws, or bolts, while the seat of the hanger supports the joist or beam. The JB26 hanger has a height of 7 inches and a length of 11-1/4 inches, making it suitable for larger dimensional lumber.

Using a joist hanger like the SIMPSON JB26 provides a stronger and more reliable connection than simply resting the beam or joist on top of the supporting structure. The hanger also allows for a more secure and efficient installation process, as it eliminates the need for complex carpentry work to make precise cuts and joints.

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.

Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options.

The JB series is a cost-effective hanger featuring min/max joist nailing options.