The SIMPSON HD3B is a heavy-duty bolted holdown designed to provide lateral and uplift resistance for wood structures. It measures 8 inches in height and has a 5/8 inch bolt diameter.

The holdown features a double-shear nailing pattern for added strength and a pre-punched hole for easier installation. It can be used in both new and retrofit applications and is suitable for use in seismic and high-wind areas. The SIMPSON HD3B is made from galvanized steel for corrosion resistance and durability.

The HDB is designed to provide loads for intermediate-load-range shearwalls, braced-wall panels and lateral applications in wood construction.

This bolted holdown is installed with bolts into studs or columns and offers low-deflection performance for a range of load requirements.

The HDB is suitable for back-to-back applications where eccentricity is a concern.

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support.

This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

Value-engineered, the HGUS is designed to carry high loads for an economical price.

The HHDQ is designed for extra-high loads and provides ease of installation.

This heavy holdown comes with Strong-Drive SDS Heavy-Duty Connector screws, which install easily, reduce fastener slip and provide a greater net section than bolts.

The HHDQ is installed directly on the sill plate and is suitable for back-to-back applications where eccentricity is a concern.

The HHUS is designed for applications where higher loads are needed.

This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength.

This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

The HSUR/L are 45 degees-skewed hangers designed to support large joist members or double I-joists in wood construction.

These heavy U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation.

The HSUR and HSUL hangers are identical except that they are skewed 45 degrees to the right (HSUR) and the left (HSUL), respectively.

The SIMPSON HU210-2 is a face mount hanger designed for connecting 2x10 joists to wood structures. It is made of 18-gauge galvanized steel, providing strength and durability.

The hanger has a speed prong that allows for quick and easy installation, and a double-shear nailing pattern which helps to reduce the chance of splitting the wood. The hanger has pre-punched holes for accurate nail placement and a skewed 45-degree design that provides a better fit for the joist. The SIMPSON HU210-2 is a versatile and reliable hanger suitable for a variety of construction projects

The Simpson HU212 is a 2" x 12" face mount hanger designed for use in connecting a wood beam or joist to a wood ledger or another wood beam. It features a "double-shear" nailing design that distributes the load through two points on each side of the joist, providing a stronger and more secure connection. The hanger is made of 18-gauge steel with a galvanized finish for corrosion resistance and durability. It has pre-punched holes for easy installation with nails or structural screws.

The HU212 can be used for both interior and exterior applications and is suitable for use in residential or commercial construction projects.

The SIMPSON HU212-3 is a face mount hanger used for supporting joists, beams or trusses. It is made of 14-gauge steel and has a ZMAX galvanized finish for added corrosion resistance. The hanger measures 4-1/2" x 10" and has a 2" x 12" joist nailing surface. The hanger also features speed prongs, which allow for quick and easy installation.

The SIMPSON HU212-3 is designed to provide a strong and secure connection between the joist and the header or beam, helping to prevent structural failure and ensuring the safety of the structure.

The SIMPSON HU28 is a face mount hanger designed for connecting 2x8 joists or beams to wood structures such as headers, ledgers, or other wood members. The hanger is made from 18-gauge steel and has a G90 galvanized coating for added corrosion resistance.

It features speed prongs which allow for quick and easy installation, as well as double-shear nailing which provides a secure and strong connection. The hanger also has a skewed 45-degree joist nail pattern which allows nails to be installed at opposing angles for greater strength.

The Simpson HU412-2 is a face mount hanger designed for 4x12 lumber. It measures 7 inches by 11-1/4 inches and is made of 14-gauge steel with a galvanized finish.

The hanger has double-shear nailing that distributes the load through two points on each joist nail for added strength. It also features a speed prong that provides temporary attachment for easy installation, and a seat that helps to locate and stabilize the joist. The Simpson HU412-2 is suitable for a wide range of applications including decks, patios, and other outdoor structures.

The SIMPSON HU414-2 is a face mount hanger designed for use in wood construction. It is made of galvanized steel for strength and durability and has a 4-inch by 14-inch size. This hanger is used to provide a strong, secure connection between a wood beam or joist and another wood member, such as a post or header.

The HU414-2 features a double-shear nailing design that distributes the load over more nails, resulting in a stronger connection. It also has a sloped seat to reduce the possibility of the wood member splitting.The hanger has pre-punched holes for nails or screws, and installation is quick and easy with the use of standard hardware.