View:
Normal Portland cement is a widely used type of hydraulic cement that is manufactured by grinding clinker, a mixture of raw materials that includes limestone, clay, and other minerals, along with gypsum.
It is a fine powder that is gray in color and is typically sold in 20kg bags.

This type of cement is called "normal" because it is the most common type of Portland cement used in the construction industry.
It is also known as Type I cement and is used in a variety of applications, including concrete, mortar, and grout.

Normal Portland cement has a high compressive strength and is highly durable, making it ideal for use in structures that require strength and stability, such as buildings, bridges, and roads.
It is also suitable for use in general construction projects, such as foundations, walls, and pavements.

When using normal Portland cement, it is important to follow the manufacturer's instructions and mix the cement with the appropriate amount of water to achieve the desired consistency.
Proper mixing and curing of the cement will ensure that it sets and hardens properly, resulting in a strong and durable finished product.
Item#:
10-NORPC20
Your Price:
0.00
EACH
Contact us to order
A 10mm 24" x 6" Rebar Corner is a reinforcement bar made of steel with a diameter of 10 millimeters, which is approximately 0.39 inches.
The bar is formed in a corner shape, with two arms that are 24 inches long and one arm that is 6 inches long, creating a right angle.

Rebar, short for reinforcement bar, is commonly used in construction projects to provide added strength to concrete structures.
In this case, the 10mm 24" x 6" Rebar Corner is likely used at the intersection of two concrete beams or columns to reinforce and strengthen the joint.
The dimensions of the rebar corner are important to ensure proper fit and support within the concrete structure.
Item#:
10MM24X6CB
Your Price:
0.00
EACH
Contact us to order
A 15mm 3' x 3' Rebar Corner typically refers to a reinforced steel bar used to reinforce the corners of concrete structures, such as building foundations, retaining walls, and other construction projects.

The "15mm" specification indicates the diameter of the rebar, which is 15 millimeters or about 0.59 inches.
The "3' x 3'" specification indicates the length and width of the rebar corner, which is three feet by three feet, or approximately 0.91 meters by 0.91 meters.

The rebar is typically bent at a 90-degree angle to create the corner shape and is embedded into the concrete structure at the intersection of the two perpendicular walls.
This helps to strengthen the corner and prevent cracking or collapse of the structure.

Rebar corners are essential to ensure the structural integrity of a building or other construction project, especially in areas prone to seismic activity or high winds.
They are commonly used in construction projects worldwide and are designed to meet specific building codes and standards for safety and durability.
Item#:
15MM3X3CB
Your Price:
0.00
EACH
Contact us to order
A 15mm 2' x 2' rebar corner typically refers to a piece of reinforced steel bar used in construction to reinforce the corners of concrete structures such as walls, columns, and beams.
The 15mm measurement refers to the diameter of the steel bar, while the 2' x 2' dimensions refer to the length and width of the corner piece.

The rebar corner is designed with a 90-degree angle to fit neatly into the corner of the structure it is reinforcing, providing additional strength and stability.
The rebar is typically made of high-strength steel, and is often coated with epoxy or other protective materials to prevent corrosion and improve durability.

The use of rebar corners helps to distribute the load of the structure more evenly, reducing the risk of cracking and failure over time.
They are commonly used in a variety of construction projects, including buildings, bridges, and other infrastructure.
Item#:
2215MMCORNER
Your Price:
0.00
EACH
Contact us to order

Void Form

4' L x 4' W x 4" H
A 4' x 4' x 4" void form is a construction material used to create voids or empty spaces within concrete structures, such as foundations, walls, and slabs.
It is typically made of extruded polystyrene foam (XPS), which is a lightweight and durable material with excellent insulation properties.

The purpose of a void form is to create a void or empty space within the concrete structure to reduce weight, save concrete, and provide a thermal break between the foundation and the surrounding soil.
The voids can also help to reduce the likelihood of cracking caused by shrinkage, settling, or expansion of the concrete.

Overall, a 4' x 4' x 4" void form is a useful construction material that can help improve the durability, stability, and energy efficiency of concrete structures.
Item#:
444V
Your Price:
0.00
EACH
Contact us to order

Void Form

4' L x 4' W x 6" H
A 4' x 4' x 6" void form is a construction material used to create voids or empty spaces within concrete structures, such as foundations, walls, and slabs.
It is typically made of extruded polystyrene foam (XPS), which is a lightweight and durable material with excellent insulation properties.

The purpose of a void form is to create a void or empty space within the concrete structure to reduce weight, save concrete, and provide a thermal break between the foundation and the surrounding soil.
The voids can also help to reduce the likelihood of cracking caused by shrinkage, settling, or expansion of the concrete.

Overall, a 4' x 4' x 6" void form is a useful construction material that can help improve the durability, stability, and energy efficiency of concrete structures.
Item#:
446V
Your Price:
0.00
EACH
Contact us to order
A 10mm 5" x 10" stirrup is a type of reinforcement used in concrete construction.
It consists of a steel bar bent into a rectangular shape with a 5-inch width and a 10-inch height, with a diameter of 10mm.
Stirrups are typically used to reinforce vertical columns or beams, and they provide added strength and stability to the structure.

The 10mm diameter of the steel bar used for the stirrup refers to the thickness of the bar, and it is a standard size commonly used in construction.
The 5-inch width and 10-inch height of the stirrup are specific to this particular product, and may vary depending on the specific application and engineering requirements of the project.

Stirrups are an essential component of reinforced concrete structures, as they help to distribute the load evenly and prevent the formation of cracks in the concrete.
They are often used in combination with other reinforcement materials, such as steel rebar, to create a strong and durable structure that can withstand the stresses and forces of daily use.
Item#:
510STIRRUPS
Your Price:
0.00
EACH
Contact us to order
A 10mm 5" x 18" stirrup is a type of reinforcement used in concrete construction.
It consists of a steel bar bent into a rectangular shape with a 5-inch width and a 18-inch height, with a diameter of 10mm.
Stirrups are typically used to reinforce vertical columns or beams, and they provide added strength and stability to the structure.

The 10mm diameter of the steel bar used for the stirrup refers to the thickness of the bar, and it is a standard size commonly used in construction.
The 5-inch width and 18-inch height of the stirrup are specific to this particular product, and may vary depending on the specific application and engineering requirements of the project.

Stirrups are an essential component of reinforced concrete structures, as they help to distribute the load evenly and prevent the formation of cracks in the concrete.
They are often used in combination with other reinforcement materials, such as steel rebar, to create a strong and durable structure that can withstand the stresses and forces of daily use.
Item#:
518STIRRUPS
Your Price:
3.86
EACH
A 10mm 5" x 22" stirrup is a type of reinforcement used in concrete construction.
It consists of a length of steel bar bent into a rectangular shape with two hooks at either end.
The 10mm diameter steel bar is commonly used for this type of stirrup, and the stirrup measures 5 inches in width and 22 inches in length.

The stirrup is placed around vertical bars, called longitudinal bars or "rebars," which are embedded in the concrete.
The stirrup helps to hold the rebars in place and prevent them from spreading apart under load, which could cause the concrete to crack or fail.

Stirrups are typically used in reinforced concrete beams and columns, as well as in other structural elements.
They play an important role in reinforcing concrete structures and ensuring their safety and durability.
Item#:
522STIRRUPS
Your Price:
0.00
EACH
Contact us to order

Void Form

6" H x 10" W x 4' L
A 6" x 10" x 4' void form is a construction material used to create voids or empty spaces within concrete structures, such as foundations, walls, and slabs.
It is typically made of extruded polystyrene foam (XPS), which is a lightweight and durable material with excellent insulation properties.

The purpose of a void form is to create a void or empty space within the concrete structure to reduce weight, save concrete, and provide a thermal break between the foundation and the surrounding soil.
The voids can also help to reduce the likelihood of cracking caused by shrinkage, settling, or expansion of the concrete.

Overall, a 6" x 10" x 4' void form is a useful construction material that can help improve the durability, stability, and energy efficiency of concrete structures.
Item#:
6104VF
Your Price:
0.00
EACH
Contact us to order

Void Form

6" H x 12" W x 4' L
A 6" x 12" x 4' void form is a construction material used to create voids or empty spaces within concrete structures, such as foundations, walls, and slabs.
It is typically made of extruded polystyrene foam (XPS), which is a lightweight and durable material with excellent insulation properties.

The purpose of a void form is to create a void or empty space within the concrete structure to reduce weight, save concrete, and provide a thermal break between the foundation and the surrounding soil.
The voids can also help to reduce the likelihood of cracking caused by shrinkage, settling, or expansion of the concrete.

Overall, a 6" x 12" x 4' void form is a useful construction material that can help improve the durability, stability, and energy efficiency of concrete structures.
Item#:
6124VF
Your Price:
0.00
EACH
Contact us to order

Void Form

6" H x 8" W x 4' L
A 6" x 8" x 4' void form is a construction material used to create voids or empty spaces within concrete structures, such as foundations, walls, and slabs.
It is typically made of extruded polystyrene foam (XPS), which is a lightweight and durable material with excellent insulation properties.

The purpose of a void form is to create a void or empty space within the concrete structure to reduce weight, save concrete, and provide a thermal break between the foundation and the surrounding soil.
The voids can also help to reduce the likelihood of cracking caused by shrinkage, settling, or expansion of the concrete.

Overall, a 6" x 8" x 4' void form is a useful construction material that can help improve the durability, stability, and energy efficiency of concrete structures.
Item#:
684VF
Your Price:
0.00
EACH
Contact us to order
View: