Milwaukee's M18 FUEL Oscillating Multi-Tool generates the fastest cuts, the power for demolition, and the lowest full tool vibration.

The POWERSTATE Brushless Motor delivers 10,000 to 20,000 OPM with an aggressive 4.2-degree oscillation angle to deliver the fastest cuts over the competition.
The cordless multi-tool also gives you the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, pushing the limits of what a multipurpose oscillating tool can do.
Vibration dampening technology delivers the lowest full tool vibration, letting you make cuts more comfortably with less fatigue.
REDLINK PLUS Intelligence ensures you achieve unmatched levels of performance, protection, and compatibility.

The M18 REDLITHIUM XC5.0 battery (not included) delivers more work per charge than competitive batteries on the market when used with the multitool.
The MILWAUKEE M18 FUEL Oscillating Multi-Tool has a 10-Setting Dial with an additional Auto-Load Feature, allowing you to adjust the speed to the application. An integrated 180-degree LED light provides maximum visibility in low-light situations.

Milwaukee's M18 FUEL 15 Gauge Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose.

Leveraging Milwaukee's nitrogen air spring mechanism, the 15 Gauge Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling.
The nitrogen air spring mechanism, combined with Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job.
This cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool.
When paired with an M18 REDLITHIUM CP2.0 battery pack, this battery-powered nailer fires up to 750 nails per charge and is fully compatible with all M18 REDLITHIUM batteries.

The MILWAUKEE M18 FUEL 15 Gauge Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless.

Milwaukee's M18 FUEL 2 Gallon Compact Quiet Compressor is designed for the professional carpenter and remodeler.
This quiet air compressor is only 68dB(A), making it the quietest cordless compressor on the market and quieter than most corded options.
We've designed this 2-gallon air compressor to be high performing while reducing the noise professionals deal with on jobsites.
Its low profile and stackable design allow Milwaukee's portable air compressor to be easily stored and transported on, around, and back off the jobsite.

It has run-time professionals need to stay productive, giving you up to 1,600 18ga brad nails per charge.

It is compatible with all MILWAUKEE M18 REDLITHIUM batteries making it easy to swap packs and keep running to finish your job.

Milwaukee's M18 FUEL 4-1/2" / 5" Grinder Slide Switch, Lock-On is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge.

The M18 FUEL 4-1/2" / 5" Grinder generates 11A corded power allowing you to complete the toughest grinding and cutting applications, all on the M18 cordless system.
The POWERSTATE Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility.
The M18 FUEL 4-1/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life.

The M18 REDLITHIUM HIGH OUTPUT XC6.0 Batteries (not included) deliver 50% more power while running 50% cooler than Milwaukee's M18 REDLITHIUM XC Batteries and are compatible with 200+ Tools in the M18 System.
With tool-free accessory and guard adjustments, you will experience faster accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market.

The MILWAUKEE M18 FUEL 4-1/2" / 5" Grinder takes cordless grinders to the next level in performance and run-time.

Milwaukee's M18 500GB Control Hub provides the most versatile pipeline inspection experience.

The control hub is compatible with all MILWAUKEE Modular Pipeline Inspection reels; it easily swaps between reel sizes, and wirelessly connects to the M18 Wireless Monitor or a mobile device for viewing.
Equipped with 500GB of internal memory, you're able to store and organize recordings on board, and seamlessly share wirelessly to a mobile device or directly to a USB drive.

The M18 500GB Control Hub features a built-in transmitter that energizes the push cable for line trace capability, making it easier to locate the camera head when in a sewer line.
The control hub is compatible with ONE-KEY Technology, giving you the ability to track the tool's location, manage it in inventory, and lock the tool out to help protect your investment.

Milwaukee's M18 FUEL 3/8" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed.

It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications.
Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts.
This MILWAUKEE 3/8" Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts.
Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool.
By selecting Mode 4, AUTO SHUT-OFF control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening.
Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.

REDLINK PLUS Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge.
The M18 REDLITHIUM battery pack (not included) fits M18 tools, delivering more work per charge and more work over the life of the pack.

Milwaukee's M18 FUEL five-tool combo kit delivers the most advanced 18-Volt cordless cutting, drilling and fastening power tool technology in the industry.

This kit features five M18 FUEL 18-Volt lithium-ion brushless cordless tools including Milwaukee's 1/2 in. hammer drill/driver (2804-20), 1/4 in. hex impact driver (2853-20), SAWZALL reciprocating saw (2720-20), 6-1/2" circular saw (2730-20), and Milwaukee's LED work light (2735-20).
Milwaukee's M18 FUEL tool system is fully compatible with the MILWAUKEE M18 18-volt cordless system.
These power tools feature the most advanced cordless technology in the industry; a POWERSTATE Brushless Motor, REDLINK PLUS Intelligence tool technology, and REDLITHIUM Battery Technology, resulting in longer motor life, longer run time and more power.

Milwaukee's five-tool kit also includes two M18 REDLITHIUM XC5.0 batteries, one M18 and M12 multi-voltage charger, a side handle, two belt clips, two bit holders, one 6" 18 TPI Thin-Kerf blade, one circular saw blade, a SAWZALL blade, and a heavy-duty contractor bag.

Milwaukee's M18 FUEL 30 Degree Framing Nailer Extended Capacity Magazine will keep you productive all day by increasing your nailer magazine capacity to accept two full strips of nails.

This means you will experience less downtime due to reloading and have a more productive day overall.

This innovative accessory is compatible only with the M18 FUEL 30 Degree Framing Nailer (2745-20).

Milwaukee's M18 REDLITHIUM CP2.0 Battery delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries.

The lithium-ion battery pack features superior pack construction, electronics, and performance giving you more work per charge and more work over pack life than any battery on the market. The rechargeable battery also offers you 2.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0 DegreesF/-18 DegreesC. Its compact, lightweight design allows you to work in tight work spaces and reduces fatigue. Built-in REDLINK Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.
An integrated temperature management system and individual cell monitoring help to maximize your battery's life.

Switch to Milwaukee's REDLITHIUM CP2.0 Compact Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools.

Milwaukee's M18 REDLITHIUM XC5.0 Battery delivers up to 2.5X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries.

The lithium-ion battery pack features superior pack construction, electronics, and performance giving you more work per charge and more work over pack life than any battery on the market.
The rechargeable battery also offers you 5.0 amp-hours of runtime.
Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0 DegreesF/-18 DegreesC.

This protection routes water away from the electronics and out of the battery pack, extends your battery's run-time and life by minimizing heat, and prevents pack failures from vibration or drops.
Built-in REDLINK Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.

An integrated temperature management system and individual cell monitoring help to maximize your battery's life. Switch to Milwaukee's REDLITHIUM XC5.0 Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools.

LITHIUM HIGH OUTPUT XC8.0 Battery Pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM XC battery packs.

The optimized combination of smaller size and increased power of the 18-volt battery provides a great solution for the entire range of M18 products.
The lithium-ion battery delivers fade-free power and runs substantially cooler through heavy applications, allowing trade professionals to push their cordless tools throughout a wide application range.

The M18 XC8.0 battery provides increased power in extreme-cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement.

The REDLITHIUM HIGH OUTPUT XC8.0 extended capacity battery is fully compatible with all Milwaukee M18 solutions.

Delivers more runtime, power and speed than standard lithium-ion batteries.

The M12 XC High Capacity REDLITHIUM Battery is designed with superior pack construction, electronics and performance to optimize work per charge and work over pack life.
It offers 3.0 amp-hours of runtime. With built-in Milwaukee durability, this battery runs cooler and performs in climates below 0 DegreesF/-18 DegreesC.

Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.
The temperature management system and individual cell monitoring help maximize battery life.
Use this REDLITHIUM extended-capacity battery to power all of your Milwaukee M12 cordless power tools.