Milwaukee's 100 ft. Closed Reel Long Tapes provide you with best in class durability on the job site.

The closed reed measuring tapes have nylon coated steel blades with minimal stretch giving you best in class accuracy.
The long tapes also have the industry's first debris wiper, Grime Guard , that prevents dirt, dust, and debris from entering the closed reel tape measure, causing jams.

Reinforced 3:1 planetary gears and full metal frame guarantees durability while you use your tape in the toughest job site conditions.

The Milwaukee 6'/ 2m Keychain Tape Measure (48-22-5506) combines on-the-go convenience with maximum durability and functionality needed by professionals in all trades.
Delivering up to 10X longer life than the competition, the new tape measure features Nylon Blade Protection for resistance to jobsite contamination and a 5-point reinforced frame for protection against damage from dropping.

For added functionality, a secure, heavy duty keychain clip gives it the versatility to clip on almost anything - from belts to keychains.
It is dual printed in imperial and metric.

Backed by a limited lifetime warranty, the 6' /2m Keychain Tape Measure confirms Milwaukee's commitment to best-in-class durability and relentless commitment to provide innovative solutions to the end user that will increase productivity.

Milwaukee's Compact Tape Measures have up to 12' of reach.
These tapes are equipped with wear resistant nylon blade protection and an impact-resistant 5-point reinforced frame to withstand the jobsite.

An integrated stamped steel belt clip allows you to easily carry the tape measure with you around the jobsite.

Milwaukee's Compact Tape Measures have up to 12' of reach.
These tapes are equipped with wear resistant nylon blade protection and an impact-resistant 5-point reinforced frame to withstand the jobsite.

An integrated stamped steel belt clip allows you to easily carry the tape measure with you around the jobsite.

Milwaukee's Compact Tape Measures have up to 12' of reach.
These tapes are equipped with wear resistant nylon blade protection and an impact-resistant 5-point reinforced frame to withstand the jobsite.

An integrated stamped steel belt clip allows you to easily carry the tape measure with you around the jobsite.

The STILETTO® 4-1/2” Trim Square is designed for precision and efficiency, ideal for finish carpentry. Additional scribe holes aid in laying out common angles, ripping boards, and setting saw blade height. The 1/4” and 3/16” revel gauge help quick set door casings, while the bottom heel ruler provides marking versatility. The 4-1/2” Trim Square is fully machined, with an anti-glare finish and the most durable coating.

• Reveal Gauge at 1/4" and 3/16"
• Most Durable Coating – Anti-Glare, Hard Coat Anodized Finish 
• Fully Machined Aluminum for Superior Accuracy
• Fully Ruled Bottom Heel
• Scribe Holes Every 1/8"
• Highly Visible Laser Etched Markings
• Center Cutouts with Common Angles – 67.5°, 45°, 30°, 22.5°

• Use Center Cutouts to Layout Longer Lines when Ripping Boards – ¼", ½", ¾", 1 ½", 1 ¾”
• 1/2” Heel Height and Offset Heel with 3/8” and 1/4” Widths
• Made in USA with Global Materials

The STILETTO® 7” Carpenter Square is designed with more layout notches to help you build faster. Additional notches aid in laying out 2'x6' material, ripping boards, and marking rafter pitches. The BOMBER™ Cutout allows for repeatable stud measurements, while the bottom heel markings provide marking versatility. The 7” Carpenter Square is fully machined aluminum, with an anti-glare finish and the most durable coating.

• BOMBER™ Cutout For Repeatable Stud Measurements at 1½", 3", 4½", and LVL
• Most Durable Coating – Anti-Glare, Hard Coat Anodized Finish 
• Fully Machined Aluminum for Superior Accuracy
• Bottom Heel Markings
• Scribe Notches every 1/8"
• Highly Visible Laser Etched Markings
• 5-1/2" Notch for Laying out 2'x6' Material
• Use BOMBER™ to Layout Longer Lines when Ripping Boards – ½”, ¾”, 1 ¾”
• Notches at Most Common Rafter Pitches
• Made in USA with Global Materials

The STILETTO® 7” Carpenter Square with Level is designed with more layout notches to help build and level faster. Additional notches aid in laying out 2'x6' material, ripping boards, and marking rafter pitches. The BOMBER™ Cutout allows for repeatable stud measurements, while the bottom heel markings provide marking versatility. The 7” Carpenter Square with Level also features a replaceable 180° vial. This square is fully machined, with an anti-glare finish and the most durable coating.
 

• BOMBER™ Cutout For Repeatable Stud Measurements at 1½", 3", 4½", and LVL
• Most Durable Coating – Anti-Glare, Hard Coat Anodized Finish 
• Fully Machined Aluminum for Superior Accuracy
• 180° Vial Visibility
• Bottom Heel Markings
• Scribe Notches every 1/8"
• Highly Visible Laser Etched Markings
• 5-1/2" Notch for Laying out 2'x6' Material
• Use BOMBER™ to Layout Longer Lines when Ripping Boards – ½”, ¾”, 1 ¾”
• Notches at Most Common Rafter Pitches
• 1-Piece Heel Assembly with Replaceable Vial
• Made in USA with Global Materials

• 8 Pack Replacement Leads
• 4 Regular Leads
• 2 Red 2 Yellow
• Coloured lead acts like a crayon, allowing for marking on almost all surfaces
• Marks and writes on all material surfaces
• Also for dusty, raw, oily, wet and dark surfaces
• Automatic lead support-  stainless steel tube
• Sharpener built into the front of the cap
• Convenient quiver cap with special clip
• Refill leads watersoluble in different colours
• Refill leads water jet resistant in different colours
• Diameter of leads 2.8 mm