This duplex control works with the three Infratech WD (Dual element) Series heaters: WD4024SS, WD5024SS, or WD6024SS (208 Volt versions included) and CD Series heaters: CD4024SS, CD5024SS, or CD6024SS.

The duplex control works by allowing control of each element individually, thus resulting in either 50% Output or 100% Output.

This duplex control works with the three Infratech WD (Dual element) Series heaters: WD4024SS, WD5024SS, or WD6024SS (208 Volt versions included) and CD Series heaters: CD4024SS, CD5024SS, or CD6024SS.

The duplex control works by allowing control of each element individually, thus resulting in either 50% Output or 100% Output.

This duplex control works with the three Infratech WD (Dual element) Series heaters: WD4024SS, WD5024SS, or WD6024SS (208 Volt versions included) and CD Series heaters: CD4024SS, CD5024SS, or CD6024SS.

The duplex control works by allowing control of each element individually, thus resulting in either 50% Output or 100% Output.

This duplex control works with the three Infratech WD (Dual element) Series heaters: WD4024SS, WD5024SS, or WD6024SS (208 Volt versions included) and CD Series heaters: CD4024SS, CD5024SS, or CD6024SS.

The duplex control works by allowing control of each element individually, thus resulting in either 50% Output or 100% Output.

This dual 240 volt surface mount waterproof duplex control works with the three Infratech WD (Dual element) Series heaters: WD4024SS, WD5024SS, or WD6024SS (208 Volt versions included) and CD Series heaters: CD4024SS, CD5024SS, or CD6024SS.

The dual waterproof surface mount assembly is suited for outdoor areas.

The duplex control works by allowing control of each element individually, thus resulting in either 50% Output or 100% output.

Infratech On/Off Switches are designed for use with all Infratech single element heaters.

They offer the advantage of simple low-cost functionality and are available in a range of installation configurations.

Infratech On/Off Switches are designed for use with all Infratech single element heaters.

They offer the advantage of simple low-cost functionality and are available in a range of installation configurations.

This Infratech wall control is a Single On/Off switch that is designed for use with all single element heaters.

The switch offers a low cost control option for all single element heaters.

This Infratech wall control is a Dual On/Off switch that is designed for use with all single element heaters.

Each heater requires its own switch.

The switch offers a low cost control option for 2 single element heaters.

Infratech On/Off Switches are designed for use with all Infratech single element heaters.

They offer the advantage of simple low-cost functionality and are available in a range of installation configurations.

Infratech heating systems offer an assortment of value controls to help home and property owners enjoy efficient ease of use thats compatible with any budget.

This 120 volt control assembly will allow you to regulate the heat output of the Infratech W1512 heater.

The control works by slowly cycling the heater on and off depending on the 1 through 10 setting as well as turns the heater on/off.

The control assembly includes a 120 volt input regulator single stainless steel wall plate and deep gang box for recessed installation in protected areas.

Single Relay 6000 Watt, 240 Volt Contactor Panel - Infratech's Contactor Panel with Digital Timer enhances our Value Control options by adding the functionality of timer capabilities.

This control is compatible for use with Infratech's Simple On/Off Switch and Duplex Stack Switch.

This single relay panel is designed for use with any Infratech single element or dual element heater.

The Contactor Panel enables the integration of timers and other 120 VAC controls, including smart switches. Range up to 6,000 watts per relay, with a maximum of 240 VAC per contactor.