Pivoting metal hardware kit to build a wooden shutter blind. With this kit, it is possible to customize the dimensions of the shutters, each box allows you to build a section up to 49 in height by 72 in width. Ideal outdoor protection from the weather elements. Ideal for gazebo, pergola, privacy panel or fencing projects. Baked powder coating finish provides excellent rust resistance. Can be used with 4 in x 4 in or 6 in x 6 in posts. Recommended shutter board sizes: 5⁄4 in x 6 in or 1 in x 6 in.

Description

• Complete hardware kit to build a pivoting sunblind system
• Allows sections up to 49 in height by 72 in width
• Use with ⁵⁄₄ in x 6 : or 1 in x 6 in boards
• Can be attached to a 4 in X 4 in post (real 3-½ in X 3-½ in) or a 6 in X 6 in post (real 5-½ in X 5-½ in)
• Ideal for gazebo, pergola, deck, privacy panel or fence

This adjustable support is designed to securely support your deck. Its 3 in adjustable makes it easier to level the structure during construction or readjust it following ground heave. A reliable and efficient solution. Its steel structure provides great strength and solidity, load bearing capacity up to 2 725 lbs. It’s completely reversible footing allows it to be installed either in a concrete support block or in a concrete form tube: simply by reversing footing 180 degrees. Designed for adjustable sizing between 3 in and 7 in, the saddle head also pivots allowing it to support a deck or shed corner. Its powder coated paint offers excellent rust resistance.

Deck track of 45 in length allows the assembly of decking without visible nails or screws. By using this fastening method, you will give a contemporary and elegant style to your deck while allowing you to appreciate the beauty of the wood. The use of these fastening strips prevents wood decay, cracks and rot caused by water infiltration. Results? Allowing your deck life to be extended by several years. Made of steel with a baked powder coated finish allowing for excellent rust resistance. Can be easily cut to fit the size of your deck.

Description

• No visible nails or screws on the surface
• Prevents wood decay caused by water infiltration
• Baked powder coating finish provides excellent rust resistance

This bench bracket makes it easy to build a seating area on your patio, balcony, or dock. This unique design uses only 5 in of floor space, providing additional storage space under the bench. Made of steel with a baked powder coated finish which offers excellent rust resistance. Its one-piece welded structure makes the product sturdy and durable. Easy to install simply attach it to the structure of the deck, balcony, or dock and install the wooden boards as instructed. Includes installation screws. Install bench brackets every 24 in C/C.

Description

• Easy bench build on a patio, balcony, or dock
• Unique design uses only 5 in of floor space
• Install bench supports 24 in apart
• Installation screws included
• Baked powder coating finish provides excellent rust resistance

This system is almost impossible to strip out. In addition, the stability button keeps the fastener straight through installation.

Available in all Trex Transcend Colours

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards

The Simpson Strong-Tie® Fascia-Fastening Solution™ consists of the counterbore bit and fascia screw, and is specially designed to securely fasten composite and PVC fascia while providing superior corrosion resistance. The fascia screw is specially designed to secure fascia material firmly in place while allowing the boards to expand and contract due to environmental conditions. The result is a professional installation that prevents occurrences of head pullover, broken screws, warping, buckling and oil-canning.

• The Type 316 stainless-steel fascia screw is driven through the predrilled and counterbored fascia material and securely into the substrate material
• Additional space around the shank of the fascia screw allows for the expansion and contraction of the fascia board
• For use with 1/2"–3/4"-thick fascia boards
• Available in 12 colors to match major manufacturers' fascia material
• Approved for attachment of Trex^® Fascia Boards