• Achieve a fastener-free deck surface: secure the first and last grooved board with STARTER Clips
• Contains 25 clips and 25 fasteners made of 304 Stainless Steel for superior corrosion resistance
• Easy to install: place clips on the outside of the joist, center with the cross-joist, and fasten with your drill—do not use an impact driver
• CAMO STARTER Clips can also be used as an L-bracket
• One package covers approximately 30 linear feet (joist spacing of 16 inches)

 CAMO ClipDRIVE®

Fastening Tool for CAMO Universal Deck Clips

·         Fasten grooved decking while comfortably standing

·         For exclusive use with CAMO Universal Deck Clips on leading grooved decking

·         Ergonomic tool features a height-adjustable handle, making it the perfect fit for the whole crew

·         Weighted nose easily targets the screw head, speeding up your jobs

·         Contractor-grade tool is heavy-duty yet lightweight and quick to assemble

·         Tool attaches to your drill—it’s not for use with impact drivers

·         T-15 Driver Bit is included

• WEDGECLIPs are for grooved wood, composite, and PVC deck board installations in any deck pattern on wood joists
• Clips are designed and warranted for use with the leading grooved deck boards
• Pre-assembled, one-pass fasteners require no partial installation—clips stay in place until you’re ready to fasten
• Stronger than competitors’ clips in reducing lateral movement and superior in uplift holding power
• Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE
• Do not use impact drivers to fasten CAMO Clips
• Plastic spacer creates 3/16 in. (4.7mm) spacing
• T-15 Driver Bit included

• For use with Pro Series Guides and Edge deck screws
• Built-in shoulder sets the automatic depth of drive for maximum holding power and prevents overdriving
• Driver Bits are available for grooved and square edge boards. Bit for grooved boards has a higher shoulder than the bit for square edge boards
• 3” (76mm)
• T15 Star Drive
• Recommended installation speed is 2500 RPM
• 2pk—both grooved or both square edge

• Speed up grooved deck installs—lock-in rows of boards and clips
• Strong enough to straighten any warped board
• Adjusts to single, double, and steel joists for job site versatility
• Multi-directional lever locks in one turn
• Use 2–4 LEVERS for the best clip installation experience

MARKSMAN Pro® Tool

Use with camo edge deck screws only

·         For use when installing composite and PVC decking, but can also be used on hardwood and cedar

·         Fastener-free surface: installs two patented CAMO Edge deck screws through the edge of the board

·         Exclusively use with CAMO Edge deck screws that auger material out to reduce splitting and cracking

·         Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates automatic 3/16 in. (5mm) spacing

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe

For composite or PVC decking. The Deck-Drive DCU Composite screw is engineered to provide beautiful fastening results for all types of composite decking while also offering greater ease of installation, a clean finish and superb corrosion resistance. The Deck-Drive DCU is the go-to-screw for all your composite decking applications, eliminating the need to mix and match screws to the decking they are suited for. Available with color-matching painted heads to blend with popular decking manufacturers and to provide a more concealed finish.

• Tri-lobe thread design reduces damage to the composite board while driving

• Inverted upper threads clear excess material to ensure the screw is seated properly and consistently

• Type-17 point penetrates composite decking with ease for faster starts

• Cap head prevents mushrooming and material from rising up above the deck for a smoother, clean-looking installation

• Approved fastener (by Trex) for Trex composite decking

• Drive type: T20 6-lobe